david/kicad-projects
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Exported some PNGs; Added a BOM; Modified a README

Browse Source
This commit is contained in:
isthatme 2017-12-06 15:50:27 -07:00
parent 9ffd66a376
commit 5723289178
5 changed files with 3 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
16Channel-LED-Driver/16Channel-LED-Driver-RevD.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 613 KiB

BIN
Altoids-PowerSupply/Altoids-PowerSupply.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 305 KiB

BIN
Altoids-PowerSupply/BOM.xlsx Normal file
View File

Binary file not shown.

3
Altoids-PowerSupply/README.md
View File

@ -39,6 +39,9 @@ Max current is:
- Probably should have chosen a different diode (especially for 12v) with higher current capabilities
- Component choices are hit and miss, smaller, cheaper components could have been selected (I went with most of my current choices just to make ordering and layout simpler and more consistent).
- Double sided load. Ideally all the components (especially surface mount) should be on one side. This comes down to component selection mostly. Not sure how much extra space I have (or could have).
- Minimum size you can get of 330uF caps is 6.3mm diam, need to change out this footprint.
- Really I should select the components and download footprints from digikey
- switch will need to be bodged in
## Rev B ##

BIN
stm32f030-eth/stm32f030-eth.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 475 KiB