From 3c94c3ed53a53d6f6b280bde833a350ed0b1345d Mon Sep 17 00:00:00 2001
From: David Lenfesty <lenfesty@ualberta.ca>
Date: Sun, 7 May 2023 10:39:18 -0600
Subject: [PATCH] hw: create KiBOM config

---
 hardware/colorlight-base/bom.ini | 97 ++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 hardware/colorlight-base/bom.ini

diff --git a/hardware/colorlight-base/bom.ini b/hardware/colorlight-base/bom.ini
new file mode 100644
index 0000000..bba23df
--- /dev/null
+++ b/hardware/colorlight-base/bom.ini
@@ -0,0 +1,97 @@
+[BOM_OPTIONS]
+; General BoM options here
+; If 'ignore_dnf' option is set to 1, rows that are not to be fitted on the PCB will not be written to the BoM file
+ignore_dnf = 1
+; If 'html_generate_dnf' option is set to 1, also generate a list of components not fitted on the PCB (HTML only)
+html_generate_dnf = 1
+; If 'use_alt' option is set to 1, grouped references will be printed in the alternate compressed style eg: R1-R7,R18
+use_alt = 0
+; If 'alt_wrap' option is set to and integer N, the references field will wrap after N entries are printed
+alt_wrap = 0
+; If 'number_rows' option is set to 1, each row in the BoM will be prepended with an incrementing row number
+number_rows = 1
+; If 'group_connectors' option is set to 1, connectors with the same footprints will be grouped together, independent of the name of the connector
+group_connectors = 1
+; If 'test_regex' option is set to 1, each component group will be tested against a number of regular-expressions (specified, per column, below). If any matches are found, the row is ignored in the output file
+test_regex = 1
+; If 'merge_blank_fields' option is set to 1, component groups with blank fields will be merged into the most compatible group, where possible
+merge_blank_fields = 1
+; Specify output file name format, %O is the defined output name, %v is the version, %V is the variant name which will be ammended according to 'variant_file_name_format'.
+output_file_name = %O_bom_%v%V
+; Specify the variant file name format, this is a unique field as the variant is not always used/specified. When it is unused you will want to strip all of this.
+variant_file_name_format = _(%V)
+; Field name used to determine if a particular part is to be fitted
+fit_field = Config
+; Make a backup of the bom before generating the new one, using the following template
+make_backup = %O.tmp
+; Default number of boards to produce if none given on CLI with -n
+number_boards = 1
+; Default PCB variant if none given on CLI with -r
+board_variant = ['default']
+; Whether to hide headers from output file
+hide_headers = False
+; Whether to hide PCB info from output file
+hide_pcb_info = False
+
+[IGNORE_COLUMNS]
+; Any column heading that appears here will be excluded from the Generated BoM
+; Titles are case-insensitive
+Part Lib
+Footprint Lib
+
+[COLUMN_ORDER]
+; Columns will apear in the order they are listed here
+; Titles are case-insensitive
+Description
+Part
+Part Lib
+References
+Value
+Footprint
+Footprint Lib
+Quantity Per PCB
+Build Quantity
+Datasheet
+
+[GROUP_FIELDS]
+; List of fields used for sorting individual components into groups
+; Components which match (comparing *all* fields) will be grouped together
+; Field names are case-insensitive
+Part
+Part Lib
+Value
+Footprint
+Footprint Lib
+
+[COMPONENT_ALIASES]
+; A series of values which are considered to be equivalent for the part name
+; Each line represents a list of equivalent component name values separated by white space
+; e.g. 'c c_small cap' will ensure the equivalent capacitor symbols can be grouped together
+; Aliases are case-insensitive
+c	c_small	cap	capacitor
+r	r_small	res	resistor
+sw	switch
+l	l_small	inductor
+zener	zenersmall
+d	diode	d_small
+
+[REGEX_INCLUDE]
+; A series of regular expressions used to include parts in the BoM
+; If there are any regex defined here, only components that match against ANY of them will be included in the BOM
+; Column names are case-insensitive
+; Format is: "[ColumName] [Regex]" (white-space separated)
+
+[REGEX_EXCLUDE]
+; A series of regular expressions used to exclude parts from the BoM
+; If a component matches ANY of these, it will be excluded from the BoM
+; Column names are case-insensitive
+; Format is: "[ColumName] [Regex]" (white-space separated)
+References	^TP[0-9]*
+References	^FID
+Part	mount.*hole
+Part	solder.*bridge
+Part	test.*point
+Footprint	test.*point
+Footprint	mount.*hole
+Footprint	fiducial
+