d812048aff
Removed diode and fixed some dumb DRC errors.
...
I had to add some vias where they really weren't needed but whatever.
2018-07-25 16:25:18 -06:00
df8580b0e7
Should mostly be done.
...
Needs to be checked over.
2018-07-25 00:23:57 -06:00
ec5b3498f4
Lots of layout + added a diode.
...
I realised that the power regulator might need protection from the 3v3
line on the programming header.
Added a diode just in case.
2018-07-24 22:54:55 -06:00
16ba256d46
Changed TRIAC from DPAK part to T0-202-3 part.
2018-07-24 18:45:23 -06:00
7bbe4d6db3
Finished final associations and tweaks
2018-07-24 18:20:15 -06:00
fdd41f9eca
Saved state on july 23
2018-07-23 21:19:34 -06:00
60bee3ab0e
Modified some values for finding components
2018-07-23 19:22:05 -06:00
356e753f5b
Changed up isolation scheme and added BOM
...
Instead of isolating each of the TRIAC channels individually,
I changed it so the system uses an isolated power supply and isolates
itself from I2C as well.
Basic BOM was started as well.
2018-07-23 22:41:56 -06:00
9e892536dd
Associated LEDs
2018-07-11 17:59:07 -06:00
03205fc71e
Added 3v3 power regulator
2018-07-11 17:47:15 -06:00
8ee713088b
Added indication LEDs, 3v3 current specs and some initial layout
2018-07-11 17:22:24 -06:00
2276c09c94
Associated footprints
2018-07-11 15:20:15 -06:00
c77450f975
more stuff
2018-07-11 12:44:53 -06:00
904ee036fd
Added 16 TRIAC outputs
2018-07-11 11:20:40 -06:00
7f294b4d93
Added zero cross detector
2018-07-11 10:22:44 -06:00
eb9309f929
Added SWD
2018-07-10 18:07:32 -06:00
c22e3f7096
Pulled BOOT0 to GND
2018-07-10 18:04:23 -06:00
07719454fc
Added notes.md and started digital stuff.
...
- Added notes.md
- Added bypass caps to STM32
- Added I2C stuff
- Added 2 SN74HC595's and various nets
2018-07-10 17:55:37 -06:00
1213854a3e
Enabled ignoring of swap files
2018-07-10 16:06:10 -06:00
925f940e64
Added AC-LED-Control Project
2018-07-09 13:13:26 -06:00
