943510eb3f
Added gerbers for relay shift board
2019-12-04 11:21:19 -07:00
3c4626602c
Finished relay shift register thingy
2019-11-17 14:25:50 -07:00
7aa6ea3c70
Added README to AC-LED-Control
2019-01-11 21:07:58 -07:00
f3052c44be
Some random stuff like gerbers
2018-08-20 14:02:49 -06:00
162de4c8bf
Removed diode from BOM.
2018-07-25 16:27:11 -06:00
d812048aff
Removed diode and fixed some dumb DRC errors.
...
I had to add some vias where they really weren't needed but whatever.
2018-07-25 16:25:18 -06:00
60b282f844
Tweaked power planes
2018-07-25 16:19:34 -06:00
df8580b0e7
Should mostly be done.
...
Needs to be checked over.
2018-07-25 00:23:57 -06:00
e0b80a8cc5
Finished most placement and ac control lines.
...
Finished up general placement of components.
Also did most of the control lines for the AC side of things.
2018-07-24 23:18:09 -06:00
ec5b3498f4
Lots of layout + added a diode.
...
I realised that the power regulator might need protection from the 3v3
line on the programming header.
Added a diode just in case.
2018-07-24 22:54:55 -06:00
16ba256d46
Changed TRIAC from DPAK part to T0-202-3 part.
2018-07-24 18:45:23 -06:00
7bbe4d6db3
Finished final associations and tweaks
2018-07-24 18:20:15 -06:00
8b8650f455
Added DPAK and SIP-4 packages
2018-07-24 18:06:54 -06:00
fdd41f9eca
Saved state on july 23
2018-07-23 21:19:34 -06:00
60bee3ab0e
Modified some values for finding components
2018-07-23 19:22:05 -06:00
356e753f5b
Changed up isolation scheme and added BOM
...
Instead of isolating each of the TRIAC channels individually,
I changed it so the system uses an isolated power supply and isolates
itself from I2C as well.
Basic BOM was started as well.
2018-07-23 22:41:56 -06:00
3f5ace3c76
Merge branch 'master' of https://github.com/isthatme/kicad-projects
2018-07-23 18:46:45 -06:00
9e892536dd
Associated LEDs
2018-07-11 17:59:07 -06:00
03205fc71e
Added 3v3 power regulator
2018-07-11 17:47:15 -06:00
cd3cc4749d
Created VXO7803-1000 3v3 power regulator
2018-07-11 17:46:44 -06:00
8ee713088b
Added indication LEDs, 3v3 current specs and some initial layout
2018-07-11 17:22:24 -06:00
2276c09c94
Associated footprints
2018-07-11 15:20:15 -06:00
0f41f5b29c
Added ONSEMI PDIP4 footprint
2018-07-11 15:19:56 -06:00
a8a0ca4385
Added Lite-on SMD-16 footprint
2018-07-11 15:19:34 -06:00
c77450f975
more stuff
2018-07-11 12:44:53 -06:00
904ee036fd
Added 16 TRIAC outputs
2018-07-11 11:20:40 -06:00
5aab515a0d
Added LTV-846S component
2018-07-11 11:20:23 -06:00
7f294b4d93
Added zero cross detector
2018-07-11 10:22:44 -06:00
602201ad75
Added FOD814-D Component
2018-07-11 10:22:24 -06:00
eb9309f929
Added SWD
2018-07-10 18:07:32 -06:00
c22e3f7096
Pulled BOOT0 to GND
2018-07-10 18:04:23 -06:00
e00d4cbf56
More notes
2018-07-10 17:59:08 -06:00
07719454fc
Added notes.md and started digital stuff.
...
- Added notes.md
- Added bypass caps to STM32
- Added I2C stuff
- Added 2 SN74HC595's and various nets
2018-07-10 17:55:37 -06:00
1213854a3e
Enabled ignoring of swap files
2018-07-10 16:06:10 -06:00
ebbed2261d
Added some stuff for AC LED control.
...
Expect more in the future.
2018-07-10 15:47:54 -06:00
925f940e64
Added AC-LED-Control Project
2018-07-09 13:13:26 -06:00
5f7c66c363
Designed a simple AC dimmer circuit. (untested)
2018-05-01 03:53:06 -06:00
5723289178
Exported some PNGs; Added a BOM; Modified a README
2017-12-06 15:50:27 -07:00
9ffd66a376
Added a README
2017-12-05 11:42:41 -07:00
eaacd03010
Started Rev B of Altoids PSU.
2017-12-05 11:37:53 -07:00
b69f603925
Re-exported some gerbers
2017-12-05 11:37:31 -07:00
fc1b2766a3
Updated Altoids PSU Readme
2017-12-05 11:35:13 -07:00
713c20e996
Made the Uno Switch Shield six headers instead of four.
...
Also some re-exporting of gerbers.
2017-12-02 21:39:13 -07:00
21169b95fe
Finished Revision A.
...
Exported gerbers.
2017-11-28 11:28:25 -07:00
7e76ec3bf5
Rev A possibly complete, need to review to ensure no errors.
...
Generated some preliminary gerbers to check things.
2017-11-27 19:23:01 -07:00
993dc446d5
Added a README for the Altoids Power Supply
2017-11-24 09:47:54 -07:00
e09d95650d
Finished schematic for Altoids Power Supply
...
Also did a few footprints, most of them not needed.
2017-11-24 09:33:19 -07:00
2cc44509ec
Some housecleaning of projects I don't care about.
2017-10-08 14:30:45 -06:00
2bc7180850
Added some more information to the README for the 16 channel board.
2017-10-08 11:04:17 -06:00
8d95cb958e
Rev D of the 16 Channel board. Fixed an issue with the opamp driving
...
BJTs
2017-10-08 10:56:23 -06:00
